Description
These alloy bonnet pins are ideal to fasten the vehicle hood. They can ensure that it does not lift during high-speed racing or in the event of an accident.
The Slide Guide locking system means that you cannot lose the pin and not have to worry about scratching your bonnet each time you remove the pin.
Can be used on – steel, alloy, fibreglass and carbon fibre bonnets.
British Patent Number 2089877.
Alloy Bonnet pins also available in; Red, Black and Steel version
Schedule B
Each Automobile (except a Superkart) must, of necessity, in any Speed Event or Circuit Race
(a) be fitted with two separate fastening systems on any bonnet or other panel where the leading edge
can be raised. The fastening systems must meet the following requirements:
(i) to be deemed separate, a fastening system must continue to function if the second system is
removed in its entirety;
(ii) they must be of adequate strength and limited elasticity and range of movement;
(iii) they must simultaneously hold the bonnet or panel closed or as an alternative for speed
events only, one fastening system must hold the bonnet or panel closed and its release must
allow the bonnet or panel to be raised to provide access to a second separate fastening
system fitted within the Automobile. The second fastening system must prevent the bonnet
or panel from being raised more than 150mm from the fully closed position.
A road registered series production Automobile fitted with an unmodified original equipment two
stage fastening system is exempt from these requirements.
