Description
The remote pull cable is to be used with 2 or 6 pin battery isolation switches either internally or externally.
An excellent addition if it is not possible to mount the isolator switch within reach of the driver.
Approximately 3.5m length
As per Schedule C of the Motorsport Australia Manual 12.06-2026-Schedule-C-V1.pdf noted below.
Each Automobile in a Circuit Race (except a Superkart) must, of necessity, also be required to comply with the following:
(i) On each Automobile, other than those of the 5th Category, fitted with an electric fuel pump, the pump power supply must cut off in a maximum of six seconds after the engine stops;
(j) Each Automobile of the 2nd and 3rd Category must be equipped with a battery isolation (master) switch which isolates the battery and stops the engine, and:
(i) it must be capable of being operated by the driver in his normal seated position;
(ii) there must be a second switch, or a remote means of operating the main switch, from the vicinity of the base of the A pillar on the driver’s side or, for an Automobile with no A pillar, in a comparable position; and
(iii) each external device must be clearly marked by a symbol showing a red spark in a white edged blue triangle of minimum edge length 150mm
